Wet-Fix Adhesive – 5Kg (Hardener Included)
Related Products
Artificial Grass Screws – 30mm (200 Pack + FREE T20 Torx Bit)
View Product £10.00 inc. VATArtificial Grass Composite Ground Spike Batten
View Product £15.00 inc. VATArtificial Grass Joint Tape – Eco-friendly
View Product £1.50 inc. VAT
Wet-Fix Adhesive – 5Kg (Hardener Included)
Wet-Fix is a professional two-component polyurethane adhesive system designed for maximum strength artificial grass installations.
Supplied as a 5kg tub with separate hardener included, Wet-Fix delivers exceptional bond strength for seams, concrete and high-traffic areas, even in damp or cold conditions.
This is the adhesive trusted by professional installers.
What Is Wet-Fix Used For?
Wet-Fix is ideal for:
- Joining large artificial grass seams
- Commercial installations
- High traffic gardens
- Bonding to concrete bases
- Concrete haunch applications
- Damp or cold weather installs
- Winter installations (low temperature performance)
Designed specifically for artificial grass bonding.
Why Choose Wet-Fix?
- Two-component polyurethane system
- Water-resistant once cured
- Performs in damp conditions
- Suitable for low winter temperatures
- High bond strength
- Flexible when cured
- Professional trade specification
If you want the strongest seam possible, this is the adhesive to use.
Coverage Guide
1 x 5kg tub covers approximately:
- 10–15m² (depending on application thickness)
- Up to 15 linear metres of seam tape or concrete haunch when applied correctly
Coverage depends on carpet backing and spread rate.
How to Use Wet-Fix (Seams & Concrete Haunch)
- Mix adhesive thoroughly with supplied hardener.
- Apply onto the white side of Artificial Grass Joint Tape using a notched trowel.
- Spread evenly (leave approx 25mm gap at tape edges).
- Lay grass into adhesive and press firmly.
- Avoid excessive adhesive squeezing through backing.
For long seams, fold grass back carefully and work in sections.
How to Use Wet-Fix (Concrete)
- Apply adhesive using a notched trowel around perimeter.
- Add internal adhesive spread or controlled beads.
- Lay grass into place and apply firm pressure.
Creates a superior full-area bond.
Mixing Instructions
- Mix entire hardener bottle into adhesive tub.
- Use mechanical mixer for consistent blend.
- Mix thoroughly before application.
- Do not mix partial ratios unless accurately measured.
Once mixed, working time begins.
Working & Cure Time (Approximate)
Open time varies by temperature:
At 20°C:
- Working time: ~1 hour
- Cure time: 4–8 hours initial
- Full cure: 24+ hours
Lower temperatures increase cure time. Do not use if risk of ground frost before curing.
When Should You Use Wet-Fix Instead of Cartridge Adhesive?
Choose Wet-Fix when:
- Seams exceed 10 metres
- Installing commercial or high-wear areas
- Maximum seam integrity is required
- Installing in damp conditions
- Working in colder temperatures
For small DIY joins, cartridge adhesive is sufficient. For serious installs, Wet-Fix wins.
Product Specification
- Size: 5kg adhesive tub
- Hardener: Included
- Type: Two-component polyurethane
- Application: Notched trowel
- Colour: Grass green
- Storage: Keep sealed between 5–25°C
- Shelf life: Approx 12 months unopened
Important Safety Note
Always:
- Wear gloves
- Avoid skin contact
- Follow mixing ratio exactly
- Read Safety Data Sheet before use
Hardener contains isocyanates, handle with care.
Complete Your Installation
Customers also purchase:
- Artificial Grass Joint Tape
- U-Pins or Nails
- Aquabond Cartridge Adhesive
- Artificial Grass Screws
- Composite Edging Systems
- Shockpad Underlay
Why Buy Wet-Fix from Artificial Super Grass?
- 1400+ Verified 5-Star Reviews
- Family-Run UK Business
- Installer-Level Support
- Nationwide Delivery
- Trusted Artificial Grass Network
Why Buy From Artificial Super Grass?
We only supply artificial grass tapes and adhesives we would confidently use on our own installations.



